Warranty Check
Wisenet Device Manager
Accessory Mount Selector
Wisenet WAVE System Calculator
Wisenet Tools
Cybersecurity
Installation Simulator
Technology Partners
Learning CenterVersion 1.0.2
RELEASE DATE 12-1-2025
RESOLVED ISSUES
Error message on Recorders tab after adding devices.
Version 1.0.1
RELEASE DATE 11-27-2025
SUMMARY
Various usability improvements.
World Wide Beta Release.
Version 1.0
RELEASE DATE 10-21-2025
SUMMARY
DesignPro General Availability release.
Project data files no longer supported for versions before 0.9.11.
Version 0.9.11
RELEASE DATE 10-21-2025
SUMMARY
Various usability improvements.
NEW FUNCTIONALITY
Google Map’s performance enhanced.
Project data files no longer supported for versions before 0.9.11.
RESOLVED ISSUES
- Google Map’s performance speed enhanced
- Google Map’s scaling and distance difference reduced.
- Missing device models added.
- Missing device accessories added.
Version 0.9.10
RELEASE DATE 9-25-2025
SUMMARY
Various usability improvements.
NEW FUNCTIONALITY
Update notice will be displayed when users launch DesignPro.
RESOLVED ISSUES
- Updated multiple camera models to show assembly with images of each accessory.
- Blind spot range is now shown properly when applying hallway view mode.
- Other minor enhancements and fixes.
Version 0.9.9
RELEASE DATE 9-25-2025
SUMMARY
Various usability improvements.
NEW FUNCTIONALITY
Field of View (FoV) Comparison table for Graphical User Interface adjusted.
RESOLVED ISSUES
- Resolved issue where exported map reports would have blank pages in PDF.
- Other minor enhancements and fixes.
Version 0.9.8
RELEASE DATE 8-22-2025
SUMMARY
Various usability improvements.
NEW FUNCTIONALITY
- More detailed information is presented when selecting accessories. Note some accessories may show more supporting information than others, and this is expected to evolve over time.
- The FoV calculator shows the PPF (pixels per foot) reference point more clearly.
RESOLVED ISSUES
- Corrected an issue with file size when exporting accessory reports.
- Changes to a model’s description in the Quotations report will be preserved after moving to another page.
- Other minor enhancements and fixes.
Version 0.9.7
RELEASE DATE 8-1-2025
SUMMARY
This release primarily focuses on usability and device compatibility to support the BETA version of DesignPro.
NEW FUNCTIONALITY
- Device peripherals are now organized into sub-categories.
- The comparison table can be filtered to highlight differences between devices and includes a Jump to top button.
- The quotation report now supports the Canadian Dollar currency.
- Emphasized the reminder to backup project files on main project dashboard.
RESOLVED ISSUES
- Google map details were not clearly visible, so the default zoom ratio has been adjusted.
- Product accessories were not always accurately counted.
- Large PDFs (longer than 10 pages or 5 MB) are not exportable, so a warning is now consistently provided.
- Some models, such as the explosion proof TNU-X6320E1WT1C, have no options for placement and they appeared as blank. This has been replaced with a Not Supported message.
- After selecting WAVE licenses, the Selected Licenses page inaccurately summed the number of types or groups of licenses.
- When specifying a device's FoV, the statistics bubble would get cropped when the target was dragged to the extreme right.
- In full screen mode, DesignPro was not accurately reporting whether a device was in the comparison table.
- Other minor bugs and usability enhancements.
Version 0.9.6
RELEASE DATE 7-11-2025
SUMMARY
This release primarily focuses on usability and device compatibility to support the BETA version of DesignPro.
NEW FUNCTIONALITY
- Enhanced UI to improve visibility and clarity throughout DesignPro.
- Added bucket device icon (for network and analog devices).
- Added a Jump to top button to easily return to the top after scrolling down a long page.
- In the accessory selector, the logic has been updated:
SBP-250WMW and SBP-400WMW with camera : the mounting hole covers, SBP-200C, SBP-250C and SBP-315C, now show by default.
For 2-channel multi-directional cameras (e.g., PNM-C12083RVD) you can select [direct install] with [wall] placement.
RESOLVED ISSUES
- All the required information must be applied to add each model on the Additionals tab.
- The number of devices on maps shows accurately after importing a project file.
- Field of View is shown correctly when blockers are added.
- Various minor bug fixes.
Version 0.9.5
RELEASE DATE 6-30-2025
SUMMARY
This release primarily focuses on improving map usability and device support to support the beta version of DesignPro.
NEW FUNCTIONALITY
- Directly select the FoV on multidirectional cameras without having to preselect the channel and improved multidirectional camera beam visibility.
- Support for panoramic cameras on maps.
- Add multiple blockers without having to reselect the blocker tool.
- Tooltip explanation during the creation of new blockers, for example, how to continue extending a line or how to finish.
RESOLVED ISSUES
Various minor bug fixes.
Version 0.9.3
RELEASE DATE: 5-9-2025
SUMMARY
This release adds usability features and bug fixes to support the beta version of DesignPro.
NEW FUNCTIONALITY
- Clicking on the background of the map automatically highlights all cameras and their color-shaded Field of View (FOV) beams.
- Selecting a single camera on the map automatically highlights all related (the same color group) cameras and their FOVs.
- The FOV is more pronounced when using Google maps.
- You can select a camera even if it is obscured by another camera’s FOV.
RESOLVED ISSUES
- Improved the accuracy of the bandwidth and storage requirements in the quotation report.
- The FOV object size is scaled in proportion to distance.
- Minor improvements and bug fixes.